A Comprehensive Approach to Materials, Mold Design, and Processing

Được đăng lên bởi haianhpham159
Số trang: 193 trang   |   Lượt xem: 693 lần   |   Lượt tải: 4 lần
Custom Molding of Thermoset Elastomers

Bernie Stritzke

Custom Molding of
Thermoset Elastomers
A Comprehensive Approach to Materials,
Mold Design, and Processing

Hanser Publishers, Munich

Hanser Publications, Cincinnati

The Author:
Bernie Stritzke, N9013 Stringers Bridge Road, EAST TROY, WI 53120, USA
Distributed in the USA and in Canada by
Hanser Publications
6915 Valley Avenue, Cincinnati, Ohio 45244-3029, USA
Fax: (513) 527-8801
Phone: (513) 527-8896 or 1-800-950-8977

Distributed in all other countries by
Carl Hanser Verlag
Postfach 86 04 20, 81631 München, Germany
Fax: +49 (89) 98 48 09

The use of general descriptive names, trademarks, etc., in this publication, even if the former are not especially
identified, is not to be taken as a sign that such names, as understood by the Trade Marks and Merchandise
Marks Act, may accordingly be used freely by anyone.
While the advice and information in this book are believed to be true and accurate at the date of going to
press, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors
or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the
material contained herein.
Library of Congress Cataloging-in-Publication Data
Stritzke, Bernie.
Custom molding of thermoset elastomers / Bernie Stritzke.
p. cm.
Includes bibliographical references and index.
ISBN-13: 978-1-56990-467-1
ISBN-10: 1-56990-467-7
1. Elastomers--Molding. 2. Thermosetting composites. 3. Rubber,
Artificial. I. Title.
TS1925.S86 2009
Bibliografische Information Der Deutschen Bibliothek
Die Deutsche Bibliothek verzeichnet diese Publikation in der Deutschen Nationalbibliografie;
detaillierte bibliografische Daten sind im Internet über <> abrufbar.
ISBN 978-3-446-41964-3
All rights reserved. No part of this book may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying or by any information storage and retrieval system,
without permission in wirting from the publisher.
© Carl Hanser Verlag, Munich 2009
Production Management: Steffen Jörg
Coverconcept: Marc Müller-Bremer,  München
Coverdesign: Stephan Rönigk
Typeset: Hilmar Schlegel, Berlin
Printed and bound by Kösel, Krugzell
Printed in Germany


I would like to acknowledge the assistance, encouragement and advice from the followin...
Để xem tài liệu đầy đủ. Xin vui lòng
A Comprehensive Approach to Materials, Mold Design, and Processing - Người đăng: haianhpham159
5 Tài liệu rất hay! Được đăng lên bởi - 1 giờ trước Đúng là cái mình đang tìm. Rất hay và bổ ích. Cảm ơn bạn!
193 Vietnamese
A Comprehensive Approach to Materials, Mold Design, and Processing 9 10 628