Ktl-icon-tai-lieu

catia Tiếng Anh

Được đăng lên bởi Hiep Quang Le
Số trang: 43 trang   |   Lượt xem: 4301 lần   |   Lượt tải: 5 lần
ADVANCED
CATIA V5 Workbook

Knowledgeware and Work Benches
Releases 12 & 13

Knowledgeware
Kinematics

Tutorial Exercises
Work Benches

Stress Analysis
Sheetmetal Design
Prismatic Machining

Richard Cozzens

Southern Utah University


SDC

PUBLICATIONS

Schroff Development Corporation




Lesson 1

Knowledgeware

Copyrighted
Material

Introduction to CATIA V5 Knowledgeware

Knowledgeware is not one specific CATIA V5 work bench but several work benches.
Some of the tools can be accessed in the Standard tool bar in the Part Design work
bench. Simply put, Knowledgeware is a group of tools that allow you to create,
manipulate and check your CATIA V5 creations.

Figure 1.1

Copyrighted
Material
Copyrighted
Material
Copyrighted
Material

1.2

Advanced CATIA V5 Workbook

Copyrighted
Material

Lesson 1 Objectives

This lesson will take you through the process of automating the creation of joggled
extrusions as shown in Figure 1.1. At the end of the lesson you should be able to do the
following:
1. Create the Extrusion Profile Sketch and Joggle Profile Sketch.
2. Assign variable names to the required constraints.
3. Create the Joggled Extrusion.CATPart using the Rib tool.
4. Create a spreadsheet with aluminum extrusion dimensions.
5. Link the spreadsheet to the Joggled Extrusion.CATPart.
6. Apply the spreadsheet to update the Joggled Extrusion.CATPart.
7. Create a Macro.
8. Modify the Macro using VB Script.
9. Create prompt windows for input using VB Script.
10. Check for company/industry standards using the Check tool.
11. Implement the updated Joggled Extrusion.CATPart in a dimensioned drawing.

Copyrighted
Material

Figures 1.1 and 1.2 show examples of the Joggled Extrusion you will create in this
lesson. Figure 1.1 shows the standard Joggled Extrusion along with its Specification
Tree. Figure 1.2 shows a spreadsheet with the resultant dimensioned drawing.
Figure 1.2

Copyrighted
Material
Copyrighted
Material

Knowledgeware

1.3

Copyrighted
Material

Knowledgeware Work Bench Tools and Tool Bars

A combination of six tool bars is used in this lesson from the Knowledgware Product.
The Knowledgeware Product is made up of the following work benches; Knowledge
Advisor, Knowledge Expert, Product Engineering Optimizer, Product Knowledge
Template, Product Function Optimization and Product Functional Definition. Each
of these work benches has a different combination of tools in each tool bar. If you switch
betwee...
ADVANCED
CATIA V5 Workbook
Knowledgeware and Work Benches
Richard Cozzens
Southern Utah University
www.suu.edu/cadcam
SDC
Schroff Development Corporation
www.schroff.com
www.schroff-europe.com
PUBLICATIONS
Releases 12 & 13
Tutorial Exercises
Knowledgeware
Work Benches
Kinematics
Stress Analysis
Sheetmetal Design
Prismatic Machining
catia Tiếng Anh - Trang 2
Để xem tài liệu đầy đủ. Xin vui lòng
catia Tiếng Anh - Người đăng: Hiep Quang Le
5 Tài liệu rất hay! Được đăng lên bởi - 1 giờ trước Đúng là cái mình đang tìm. Rất hay và bổ ích. Cảm ơn bạn!
43 Vietnamese
catia Tiếng Anh 9 10 851