Ktl-icon-tai-lieu

Field commissioning and maintenance of electrical installations and equipment.

Được đăng lên bởi mr.minh8x
Số trang: 108 trang   |   Lượt xem: 1256 lần   |   Lượt tải: 2 lần
MANUAL

FIELD COMMISSIONING AND MAINTENANCE OF
ELECTRICAL INSTALLATIONS AND EQUIPMENT

DEP 63.10.08.11-Gen.
August 2000

DESIGN AND ENGINEERING PRACTICE

This document is restricted. Neither the whole nor any part of this document may be disclosed to any third party without the prior written consent of Shell Global
Solutions International B.V. and Shell International Exploration and Production B.V., The Netherlands. The copyright of this document is vested in these companies. All
rights reserved. Neither the whole nor any part of this document may be reproduced, stored in any retrieval system or transmitted in any form or by any means
(electronic, mechanical, reprographic, recording or otherwise) without the prior written consent of the copyright owners.

DEP 63.10.08.11-Gen.
August 2000
Page 2
PREFACE
DEPs (Design and Engineering Practice) publications reflect the views, at the time of publication, of:
Shell Global Solutions International B.V. (Shell GSI)
and
Shell International Exploration and Production B.V. (SIEP)
and
Shell International Chemicals B.V. (SIC)
and
other Service Companies.
They are based on the experience acquired during their involvement with the design, construction, operation and
maintenance of processing units and facilities, and they are supplemented with the experience of Group Operating
companies. Where appropriate they are based on, or reference is made to, international, regional, national and industry
standards.
The objective is to set the recommended standard for good design and engineering practice applied by Group
companies operating an oil refinery, gas handling installation, chemical plant, oil and gas production facility, or any other
such facility, and thereby to achieve maximum technical and economic benefit from standardization.
The information set forth in these publications is provided to users for their consideration and decision to implement.
This is of particular importance where DEPs may not cover every requirement or diversity of condition at each locality.
The system of DEPs is expected to be sufficiently flexible to allow individual operating companies to adapt the
information set forth in DEPs to their own environment and requirements.
When Contractors or Manufacturers/Suppliers use DEPs they shall be solely responsible for the quality of work and the
attainment of the required design and engineering standards. In particular, for those requirements not specifically
covered, the Principal will expect them to f...
MANUAL
FIELD COMMISSIONING AND MAINTENANCE OF
ELECTRICAL INSTALLATIONS AND EQUIPMENT
DEP 63.10.08.11-Gen.
August 2000
DESIGN AND ENGINEERING PRACTICE
This document is restricted. Neither the whole nor any part of this document may be disclosed to any third party without the prior written consent of Shell Global
Solutions International B.V. and Shell International Exploration and Production B.V., The Netherlands. The copyright of this document is vested in these companies. All
rights reserved. Neither the whole nor any part of this document may be reproduced, stored in any retrieval system or transmitted in any form or by any means
(electronic, mechanical, reprographic, recording or otherwise) without the prior written consent of the copyright owners.
Field commissioning and maintenance of electrical installations and equipment. - Trang 2
Để xem tài liệu đầy đủ. Xin vui lòng
Field commissioning and maintenance of electrical installations and equipment. - Người đăng: mr.minh8x
5 Tài liệu rất hay! Được đăng lên bởi - 1 giờ trước Đúng là cái mình đang tìm. Rất hay và bổ ích. Cảm ơn bạn!
108 Vietnamese
Field commissioning and maintenance of electrical installations and equipment. 9 10 411