Ktl-icon-tai-lieu

hướng dẫn sử dụng máy tiện CNC

Được đăng lên bởi Tờ Rai Chín Mươi
Số trang: 330 trang   |   Lượt xem: 852 lần   |   Lượt tải: 0 lần
Instruction Manual
Safety Guide
Specifications
Installation
Operation
Maintenance
Special Version

Introduction
Thank you for purchasing a Takamatsu CNC Precision Lathe. This machine is designed and
manufactured giving first priority to safety precautions according to nationally recognized
standards, so that it can be operated safely.
However, safe operation cannot always be ensured if an operator misuses the machine or ignores
safety regulations. Failure to comply with these instructions will damage the machine and products
as well as result in critical bodily injuries.
Read the attached manuals thoroughly and understand the correct procedures for
operation so that the machine can be operated efficiently and safely.
Ignoring the safety precautions in this Manual will result in bodily injuries. Aside from these
precautions, there are many "Don'ts" to be observed when operating the machine. It should be
considered a "Don't" if not stated in this Manual.
In this Manual, safety instructions are classified into three levels of seriousness regarding personal
injury or machine damage, as indicated by the following marks. Pay particular attention to the
safety instructions regarding situations that are extremely dangerous.
DANGER

Failure to follow the instructions will result in critical bodily injuries.

WARNING

Failure to follow the instructions will result in serious bodily injuries or
machine damage.

CAUTION

Failure to follow the instructions may result in less serious bodily injuries or
machine damage.

*

The word "qualified" used in this Manual refers to persons who are qualified to perform operation and
maintenance of this machine as authorized by a safety control supervisor.

*

Outline drawings, dimensions, and types and quantities of parts described in this manual are subject to
change according to modifications made to this machine. Check the types and quantities of parts to be
replaced, and place an order with Takamatsu.

<Precautions Related to Foreign Exchange and Foreign Trade Control Laws>
This product (machine and ancillary equipment) may fall under the category of controlled goods by
the foreign exchange and foreign trade control laws. As such, the exportation must be authorized by the
Japanese government as stipulated in the laws.
This product is manufactured in accordance with the regulations and standards that prevail in the country or
region of destination. The user must not export, sell, or relocate the product, to any country with
d...
Safety Guide
Specifications
Installation
Operation
Maintenance
Special Version
Instruction Manual
hướng dẫn sử dụng máy tiện CNC - Trang 2
Để xem tài liệu đầy đủ. Xin vui lòng
hướng dẫn sử dụng máy tiện CNC - Người đăng: Tờ Rai Chín Mươi
5 Tài liệu rất hay! Được đăng lên bởi - 1 giờ trước Đúng là cái mình đang tìm. Rất hay và bổ ích. Cảm ơn bạn!
330 Vietnamese
hướng dẫn sử dụng máy tiện CNC 9 10 775