User Guide: Mentor 2

Được đăng lên bởi tai-lieu-mien-phi
Số trang: 7 trang   |   Lượt xem: 284 lần   |   Lượt tải: 1 lần

User Guide

Mentor II
DC Drives

25A to 1850A

Part Number: 0410-0013-13
Issue Number: 13

Safety Information
Persons supervising and performing the electrical installation or maintenance of a drive and/or an external
Option Unit must be suitably qualified and competent in these duties. They should be given the opportunity to
study and if necessary to discuss this User Guide before work is started.
The voltages present in the drive and external option units are capable of inflicting a severe electric shock and
may be lethal. The Stop function of the drive does not remove dangerous voltages from the terminals of the drive
and external Option Unit. Mains supplies should be removed and left removed for a minimum of 2 minutes
before any servicing work is performed.
The installation instructions should be adhered to. Any questions or doubt should be referred to the supplier of
the equipment. It is the responsibility of the owner or user to ensure that the installation of the drive and external
Option Unit, and the way in which they are operated and maintained complies with the requirements of the
Health and Safety at Work Act in the United Kingdom and applicable legislation and regulations and codes of
practice in the UK or elsewhere.
The Stop and Start inputs of the drive should not be relied upon to ensure safety of personnel. If a safety hazard
could exist from unexpected starting of the drive, an interlock should be installed to prevent the motor being
inadvertently started.

General information
The manufacturer accepts no liability for any consequences resulting from inappropriate, negligent or incorrect
installation or adjustment of the optional operating parameters of the equipment or from mismatching the drive
with the motor.
The contents of this User Guide are believed to be correct at the time of printing. In the interests of a
commitment to a policy of continuous development and improvement, the manufacturer reserves the right to
change the specification of the product or its performance, or the contents of the User Guide, without notice.
All rights reserved. No part of this User Guide may be reproduced or transmitted in any form or by any means,
electrical or mechanical including photocopying, recording or by any information storage or retrieval system,
without permission in writing from the publisher.

Important! Drive software version
This product is supplied with the latest version of user-interface and machi...
User Guide
Mentor II
DC Drives
25A to 1850A
Part Number: 0410-0013-13
Issue Number: 13
User Guide: Mentor 2 - Trang 2
Để xem tài liệu đầy đủ. Xin vui lòng
User Guide: Mentor 2 - Người đăng: tai-lieu-mien-phi
5 Tài liệu rất hay! Được đăng lên bởi - 1 giờ trước Đúng là cái mình đang tìm. Rất hay và bổ ích. Cảm ơn bạn!
7 Vietnamese
User Guide: Mentor 2 9 10 39