Ktl-icon-tai-lieu

Mastercam

Được đăng lên bởi duythe_hn
Số trang: 454 trang   |   Lượt xem: 2344 lần   |   Lượt tải: 0 lần
Version 9

Mill/Design
Tutorial

Version 9 Mill/Design Tutorial
(Metric version)

Mastercam Version 9 Mill
Mastercam Version 9 Design
© 2002 CNC Software, Inc.

2

Mastercam Version 8 Lathe Applications Guide

Mastercam Version 9 Mill/Design Tutorial (Metric version)
Date: January 21, 2002
Copyright © 2002 CNC Software, Inc. - All rights reserved.
First Printing: January 21, 2002
Software: Mastercam Mill Version 9, Mastercam Design Version 9
IMPORTANT NOTICE!
PLEASE READ THIS STATEMENT AND THE SOFTWARE LICENSE AGREEMENT COMPLETELY BEFORE USING THIS
SOFTWARE.
BY CONTINUING TO USE THIS SOFTWARE, YOU (EITHER AN INDIVIDUAL OR A SINGLE ENTITY) INDICATE YOUR
INTENTION TO BE BOUND BY AND ACCEPT THE TERMS AND CONDITIONS OF THIS SOFTWARE LICENSE. IF YOU DO
NOT AGREE TO THESE TERMS AND CONDITIONS YOU MAY NOT ACCESS OR OTHERWISE USE THIS SOFTWARE AND
WILL IN FACT BE PROHIBITED FROM DOING SO. THIS COMPUTER SOFTWARE MAY BE USED ONLY PURSUANT TO THE
TERMS AND CONDITIONS SET FORTH BELOW, AND SOLELY IN CONJUNCTION WITH THE ACCOMPANYING SECURITY
MECHANISM (UNLESS OTHERWISE SPECIFIED IN THE “EXCEPTIONS TO SECURITY MECHANISM REQUIREMENTS”
SECTION OF SUCH TERMS AND CONDITIONS) WHICH MUST BE PRESENT ON YOUR COMPUTER (OR NETWORK AS
APPLICABLE) AT ALL TIMES DURING SUCH USE.
Software License
CNC Software, Inc. (“CNC”) a Connecticut corporation with its principal place of business at 671 Old Post Rd., Tolland, Connecticut,
06084 hereby grants to you a non-exclusive, non-transferable license (the “License”) to use (and, if applicable, to permit your authorized
employees to use), solely in accordance with the terms and conditions of this Software License Agreement, this software program (the
“Program”) and any accompanying documentation (the “Documentation”) solely for your internal business purposes and solely in
conjunction with the accompanying hardware or software device, method, scheme or other security measure provided by CNC which allows
a user to access the Program and prevents unauthorized access to the Program (the “Security Mechanism”). (The Program, any updates to
the Program, and the Documentation shall hereinafter collectively be referred to as the “Software”).
Restrictions
You may not use the Program without a Security Mechanism provided by CNC or CNC’s suppliers. When CNC or CNC’s suppliers provide
you with a single-user Security Mechanism, the Program may only be used (in executable code form only) on a single computer to which
the Security Mechanism is directl...
Mill/Design
Version 9
Tutorial
Mastercam - Trang 2
Để xem tài liệu đầy đủ. Xin vui lòng
Mastercam - Người đăng: duythe_hn
5 Tài liệu rất hay! Được đăng lên bởi - 1 giờ trước Đúng là cái mình đang tìm. Rất hay và bổ ích. Cảm ơn bạn!
454 Vietnamese
Mastercam 9 10 899